simplify git secret flaw

basics/Joyous_ASCII.md

@@ -0,0 +1,12 @@
+---
+title: "Joyous ASCII"
+tags: [ "fun" ]
+---
+
+- `asciiquarium`
+- `cbonsai -lim "$(fortune)"`
+
+```bash
+cow=$(cowsay -l | sort -R | head  -1)
+fortune -s | figlet | cowsay -nf $cow | lolcat
+```

basics/cron.md

@@ -2,9 +2,11 @@
 title: "cron"
 tags: [ "Documentation", "Basics" ]
 ---
-# Cron
+# Cronie
 
-The crontab program might have various names, like `cronie` or `crond`.
+The `cronie` program is also known as `crond`.
+
+## Install
 
 ```bash
 sudo apt search -n ^cron
@@ -17,29 +19,33 @@ sudo systemctl list-unit-files | grep cron
 sudo systemctl enable --now $NAME
 ```
 
-Make a file for your crontab, like this:
+## Usage
+
+Show your current crontab:
 
 ```bash
-echo '39 */3 * * * /usr/bin/updatedb' > "$USER".cron
+crontab -l
+```
+
+You can put this in a file and edit it:
+
+```bash
+crontab -l > $filename
+echo '39 3 */3 * * /bin/tar czf /tmp/etc_backup.tgz /etc/' >> $filename
 ```
 
 Then apply that crontab:
 
 ```bash
-crontab "$USER".cron
-rm "$USER".cron
+crontab $filename
+rm $filename
 ```
+
 The `cron` program will check your syntax before adding the tab.
 
 Your crontab file sits somewhere in `/var/spool/`.
 Probably in `/var/spool/cron`.
 
-Check how your tab currently looks:
-
-```bash
-crontab -l
-```
-
 ## Syntax
 
 `* * * * *`
@@ -50,43 +56,61 @@ These five points refer to:
 
 So '3pm every Sunday' would be:
 
-> 0 15 * * 7
+`0 15 * * 7`
 
 Here 'Sunday' is indicated by "7", and '3pm' is 'the 15th hour'.
 The minute is '0' (i.e. '0 minutes past three pm').
 
 Doing the same thing, but only in February, would be:
 
-> 0 15 * 2 7
+`0 15 * 2 7`
 
-### Full Paths
+### Variables
+
+`cronie` doesn't know where you live, so to put something in your `$HOME` directory, you have to tell it:
 
-Executing something requires the full path to where it is, so you cannot simply use `apt update -y`, because cron does not know where `apt` is.
-Instead, find out where it is:
 
 ```bash
-type -P apt
+echo "HOME=$HOME" > $filename
+crontab -l >> $filename
+crontab $filename
 ```
 
-`/usr/bin/apt`
+`cronie` doesn't know where anything lives, including programs.
+You can give it your usual `$PATH` variable like this:
 
-Then put that into the crontab:
 
 ```bash
-sudo crontab -e
+echo $PATH > $filename
+crontab -l >> $filename
+crontab $filename
 ```
 
-> 40 */3 * * * /usr/bin/apt update -y
+Now instead of doing this
 
-This will run `apt update -y` as root every 3 hours, at 40 minutes past the hour, e.g. 00:40, 03:40, 06:40.
+`40 */3 * * * /usr/bin/du -sh $HOME/* | sort -h > $HOME/sum.txt`
 
-## Directories
+You can simply do this: 
+
+`40 */3 * * * du -sh $HOME/* | sort -h > $HOME/sum.txt`
+
+## Run as Root
 
 You can execute a script as root by putting it into a directory, instead of in the tab.
 Look at the available cron directories:
 
 ```bash
-ls /etc/cron.\*
+ls -d /etc/cron.*
+```
+
+Make a script which runs daily:
+
+```bash
+f=apt_update.sh
+echo '#!/bin/bash' > $f
+echo 'apt update --yes' >> $f
+chmod +x $f
+sudo mv $f /etc/cron.daily/
 ```
 
 ### Testing with runparts
@@ -97,47 +121,9 @@ Run-parts runs all executable scripts in a directory.
 run-parts /etc/cron.hourly
 ```
 
-## Tips
-
-### Variables
-
-Add your `$HOME` to crontab to use scripts.
-First add `HOME=/home/$USER`, then you can use syntax like this:
-
-0 * * * * $HOME/.scripts/myScript.sh
-
-*Remember to test the script by executing that line first*:
-
-```bash
-$HOME/.scripts/myScript.sh
-```
-You can also add your regular path to your crontab as a variable (see example below).
-If you're using vim as the editor, just run this at the top of your crontab:
-
-```bash
-:r!echo PATH=$PATH
-```
+# Troubleshooting
 
 ### `date` Commands
 
 Cron doesn't understand the `%` sign, so if you want to use `date +%R`, then it should be escaped with a backslash: `date +\%R`.
 
-### File Location
-
-The crontab files are in `/var/spool/cron/`, so you can backup or restore them.
-
-# Example
-
-```
-HOME=/home/user
-PATH=/usr/condabin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/home/user/.local/bin:/home/user/.scripts/:/home/user/.local/bin:/home/user/.scripts/
-
-1 0 1 * *    /usr/bin/mkdir -p $HOME/arc/$(date +\%Y/\%m)
-
-18 0 1 */3 * $HOME/.scripts/mail-clean.sh
-
-* * * * * ping -c 1 home || mail-pull.sh
-
-50 18 * * * /usr/bin/timeout 30m /usr/bin/syncthing
-
-```

data/git/git_secret.md

@@ -1,9 +1,9 @@
 ---
-title: "git secret"
+title: "git-secret"
 tags: [ "data", "git" ]
 ---
 
 This utility is largely useless, as it can only identify people by their email.
 So if someone has multiple GPG keys associated with one email, the tool will not work.
 
-Worse than not working, it may 'suddenly' stop working as you try to transfer a secret to someone, who then discovers that `git-secret` requires them to mess about with their GPG keyring in order to use the repository.
+A broken tool is better than a tool which will break soon.

data/sc-im.md

@@ -1,33 +1,47 @@
 ---
 title: "sc-im"
-tags: [ "Documentation", "data" ]
+tags: [ "Documentation", "TUI", "data" ]
 ---
+
+- [Sample file](sc-im/sample.sc)
+
 # Basic Commands
 
-> H = highest part
-> L = lowest part
-> gg = top
+## See Cells
 
-> g$ = most right.
-> g0 = most left.
+Cells are hard to see.
+Change this with `:set autowrap`.
 
-> \ = insert middle
-> \> = insert left
-> < = insert right
+Make `sc-im` always autowrap:
 
-gb4 = to to cell b4
+```bash
+mkdir .config/sc-im/bash
+echo 'set autowrap' >> .config/sc-im/scimrc
+```
 
-> aa = see all text in cells
-> f = format cells so you can see it.
-> fl = format wider right
-> fh = format smaller left
+## Movement
 
-> fj = format wider down
-> fk = format smaller down
+| Command                             | Key |
+|:------------------------------------|:---:|
+| highest part                        | H   |
+| lowest part                         | L   |
+| top                                 | gg  |
+| most right.                         | g$  |
+| most left.                          | g0  |
+| insert middle                       | \   |
+| insert left                         | \>  |
+| insert right                        | <   |
+| to to cell b4                       | gb4 |
+| see all text in cells               | aa  |
+| format cells so you can see it.     | f   |
+| format wider right                  | fl  |
+| format smaller left                 | fh  |
+| format wider down                   | fj  |
+| format smaller down                 | fk  |
 
-# Edit
+## Edit
 
-## Text
+### Text
 
 | Action                | Key |
 |:----------------------|:---:|
@@ -35,7 +49,7 @@ gb4 = to to cell b4
 | text (right align)    | >   |
 | Edit existing  text   | E   |
 
-## Meta Actions
+### Meta Actions
 
 | Action                | Key |
 |:----------------------|:---:|
@@ -48,7 +62,7 @@ gb4 = to to cell b4
 |  delete a cell        | x   |
 
 
-## Functions
+### Functions
 
 | Action                          | Key          |
 |:--------------------------------|:------------:|
@@ -58,7 +72,7 @@ gb4 = to to cell b4
 |  minimumof those numbers        | =@min(B1:B8) |
 |  multiply C1 to C8              | =@prod(C1:C8)|
 
-## Visual
+### Visual
 
 | Action                          | Key          |
 |:--------------------------------|:------------:|

data/sc-im/sample.sc

@@ -0,0 +1,38 @@
+# This data file was generated by the Spreadsheet Calculator Improvised (sc-im)
+# You almost certainly shouldn't edit it.
+
+newsheet "Sheet1"
+movetosheet "Sheet1"
+offscr_sc_cols 0
+offscr_sc_rows 0
+nb_frozen_rows 1
+nb_frozen_cols 0
+nb_frozen_screenrows 2
+nb_frozen_screencols 0
+format A 14 1 0
+format B 18 2 0
+format 0 2
+freeze 0
+label A0 = "Food by Weight"
+leftstring B0 = "No. Meals"
+leftstring A1 = "Ajvar"
+let A1 = 5
+let B1 = A1*$A$10
+leftstring A2 = "Apples"
+let A2 = 3
+let B2 = A2*$A$10
+leftstring A3 = "Rocket"
+let A3 = 0.2
+let B3 = A3*$A$10
+leftstring A4 = "Beli Cheese"
+let A4 = 1
+let B4 = A4*$A$10
+leftstring A6 = "Total"
+let A6 = @sum(A1:A4)
+leftstring B6 = "Total"
+let B6 = @sum(B1:B4)
+leftstring A7 = "Average"
+let A7 = @avg(A1:A4)
+leftstring A10 = "Weight of Meal"
+let A10 = 0.3
+goto A0

networking/graph-easy.md

@@ -39,7 +39,7 @@ Try placing this in a file:
 
 > [ One ] { fill: seagreen; color: white; } -- label --> [ Two ] { shape: triangle; }
 > 
-> [ One ] => { arrow-style: closed; } [ Three ]
+> [ One ] => { arrow-style: closed; } [ Three ] { border-style: none; }
 > 
 > [ Five ] { fill: maroon; color: yellow; } <=> [ Three ]
 > 
@@ -54,3 +54,15 @@ Try placing this in a file:
 > [ Eight ] .. [ None ] { shape: none; fill: red; color: brown; }
 > 
 > [ no Network ] --> [ Is there an IP address? ]
+
+> [ Little Group: o]
+
+
+```
+echo "( EU [ Madrid ] <---> [ K ] {label: Karlsruhe;}
+    <== ...O\n ..o\n .O\no \nchoo choo  ==> [ Cern ] [ Cern ] <== ...O\n ..o\n .O\no \nchoo choo  ==> [ Paris ] <...> [ B ] {label: Budapest} )
+    [ B ] <---> [ Belgrade ] [ G ] {label: Glasgow; }
+    <==> [ M ] {label: Manchester },
+    [ Madrid ] <---> [ Belgrade ] [ M ] <--> [ London ] <--> [ B ],
+        [ Belgrade ]" | graph-easy  --boxart
+```

system/fstab.md

@@ -13,11 +13,14 @@ The ordering of `/etc/fstab` is
 5. dump
 6. pass
 
-E.g.:
 
-> UUID=877f14e8-4738-46b0-884f-ba330dad1a7d       /mnt/biggie                     ext4        nofail,rw,relatime      0 2
-> 
-> UUID=B21648C416488AF5 /mnt/share ntfs       nofail,rw,nosuid,nodev,user_id=0,group_id=0,allow_other,blksize=4096 0 0
+*Example:*
+
+```
+UUID=877f14e8-4738-46b0-884f-ba330dad1a7d       /mnt/biggie                     ext4        nofail,rw,relatime      0 2
+
+UUID=B21648C416488AF5 /mnt/share ntfs       nofail,rw,nosuid,nodev,user_id=0,group_id=0,allow_other,blksize=4096 0 0
+```
 
 ## 5: Dump
 

system/monitoring.md

@@ -22,3 +22,8 @@ REP=5
 free --lohi -g -s $REP | lolcat
 ```
 
+Check the next thing cron will do:
+
+```bash
+cronnext /var/spool/cron/$USER -l
+```

system/systemd/journal.md

@@ -10,6 +10,12 @@ See a running log of all system messages:
 journalctl -f
 ```
 
+Or just one user:
+
+```bash
+journalctl --user -f
+```
+
 Or just one unit (`sshd`):
 
 ```bash