[Sync] Lua Hyprland chain, licence cleanup

gui/.config/hypr/hyprland.lua

@@ -0,0 +1,128 @@
+-- gui package — the dots Hyprland layer, ported from the hyprlang chain
+-- (hyde.conf / userprefs.conf / keybindings.conf / windowrules.conf) to
+-- HyDE 26.x's Lua config. Loaded by ~/.local/share/hypr/hyde.lua second-to-last
+-- (after every HyDE module, before lua_state.workflows), so plain assignments
+-- here override HyDE's defaults. HyDE never overwrites this file.
+--
+-- The rules and keybinds sections live in ./dots_rules.lua and
+-- ./dots_binds.lua, required in place below. Host-specific config (monitors,
+-- workspace pins, gaps/rounding, gpu extras) lives in ./host.lua, loaded at
+-- the bottom — same layering the hyprlang chain had with
+-- `source = ./host.conf`.
+
+-- Bootstrap: Hyprland prefers hyprland.lua as the entry point when started
+-- without a config; without this block that path yields a bare cursor. hyde.lua
+-- sets `hyde` on its first line, so this runs only when HyDE has not loaded.
+-- The `return` matters: dofile(hyde.lua) re-enters this file through
+-- check_require("hyprland"), so by the time dofile returns the body below has
+-- already run once — falling through would register everything twice.
+if not hyde then
+	local share = os.getenv("XDG_DATA_HOME") or (os.getenv("HOME") .. "/.local/share")
+	local entry = share .. "/hypr/hyde.lua"
+	local handle = io.open(entry, "r")
+	if not handle then
+		error(
+			"HyDE is not installed at " .. entry .. ". Run HyDE's install.sh -r, or point Hyprland at your own config."
+		)
+	end
+	handle:close()
+	dofile(entry)
+	return
+end
+
+local hc = hyde.config
+local home = os.getenv("HOME") or ""
+
+-- ── Apps ─────────────────────────────────────────────────────────────────────
+-- Named directly (not hyde-shell open --fall …) for the same reason hyde.conf
+-- did: skip the wrapper, match the xdg defaults. The assignments cover lazy
+-- readers of hc.app.*, but key_binds.lua already baked the defaults into its
+-- Super+B/E dispatchers at bind time — hence the explicit rebinds in
+-- dots_binds.lua.
+hc.app.browser = "zen-browser"
+hc.app.explorer = "dolphin"
+
+-- ── Startup ──────────────────────────────────────────────────────────────────
+-- One knob suppresses HyDE's plain waybar AND launches the cava rig (was
+-- $start.BAR= + a userprefs exec-once). start_up.lua captures hc.start by
+-- reference and the hyprland.start event fires after this file loads, so the
+-- override lands in time. `wbar` (gui/.local/bin) runs the rig as the
+-- dots-waybar.service transient unit with Restart=always: waybar 0.15.0 dies on
+-- every DP-2 link drop/return, and as a plain scope nothing relaunched it.
+-- Absolute path: the exec env's PATH is not guaranteed to hold ~/.local/bin.
+hc.start.bar = home .. "/.local/bin/wbar start"
+-- Not part of the legacy session — the Lua defaults would newly launch these
+-- (both binaries are installed). hyprsunset would visibly tint the screen.
+-- Delete a line to adopt the HyDE default.
+hc.start.blue_light_filter_daemon = ""
+hc.start.clipboard_persist = ""
+-- nm-applet --indicator is already the Lua default (kept deliberately: the
+-- tray icon is the one place with a quick connect/disconnect menu).
+
+-- ── UI / icon theme ──────────────────────────────────────────────────────────
+-- dots-icons = repo-tracked overlay theme (gui/.local/share/icons/dots-icons)
+-- that inherits Tela-circle-dracula and swaps the tray/status icons for the
+-- monochrome panel set — without it, waybar on a fractionally-scaled monitor
+-- gets the colored-circle variants (the blue nm-applet blob).
+hc.ui.icon_theme = "dots-icons"
+-- The theme-switch pipeline regenerates lua_state/ui.lua from the theme's
+-- hypr.theme and writes THAT to dconf (color/hypr.sh -> color/dconf.lua), so
+-- the assignment above is not enough on its own. Top-level code re-runs on
+-- every `hyprctl reload`, and both theme-switch paths end in a reload, so this
+-- write lands last — the Lua-mode equivalent of the legacy $exec.dConf.
+-- Upstream-sanctioned alternative if this ever races: add
+--   [hyprland]\n icon_theme = "dots-icons"
+-- to ~/.config/hyde/config.toml (state/hyde/hyprland.conf then overrides the
+-- theme vars in theme.switch.sh:151).
+hl.exec_cmd([[dconf write /org/gnome/desktop/interface/icon-theme "'dots-icons'"]])
+
+-- ── Env (was userprefs.conf) ─────────────────────────────────────────────────
+hl.env("SSH_AUTH_SOCK", (os.getenv("XDG_RUNTIME_DIR") or "") .. "/ssh-agent.socket")
+hl.env("ELECTRON_OZONE_PLATFORM_HINT", "x11") -- disable after hyprland fixes electron flickering
+
+-- ── Layer + window rules (dots_rules.lua) ────────────────────────────────────
+-- Plain require, not check_require: stow --no-folding links new files one by
+-- one, so a host that pulled without re-running install.sh fails loudly in
+-- `hyprctl configerrors` instead of booting silently without its rules/binds.
+-- The dots_ prefix matters: hyde.lua searches HyDE's own lua/ before
+-- ~/.config/hypr, so a bare window_rules / key_binds would load HyDE's module.
+require("dots_rules")
+
+-- ── Animations ───────────────────────────────────────────────────────────────
+-- The legacy chain ran $ANIMATION=theme — the hyprdots set from the theme's
+-- animations.dcol. The Lua chain cannot inherit it: hyq's hyprland-lua.json
+-- schema dumps decoration/borders into lua_state/hypr_theme.lua but NOT the
+-- animations block (LUA-PORT.md risk 6, confirmed live), so without this the
+-- session falls back to Hyprland's slower built-in defaults. Ported verbatim
+-- from the generated ~/.config/hypr/animations/theme.conf.
+-- Conditional so `hyde-shell animations --select` still works: a selector-
+-- chosen lua_state/animations.lua loads earlier (dynamic.lua) and this block
+-- steps aside for it.
+local anim_state = (os.getenv("XDG_STATE_HOME") or home .. "/.local/state") .. "/hyde/lua_state/animations.lua"
+local anim_f = io.open(anim_state, "r")
+if anim_f then
+	anim_f:close()
+else
+	hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+	hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.1 }, { 0.1, 1.1 } } })
+	hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+	hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+	hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+	hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+	hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+	hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+	hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+	hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+	hl.animation({ leaf = "fade", enabled = true, speed = 10, bezier = "default" })
+	hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
+end
+
+-- ── Keybinds (dots_binds.lua) ────────────────────────────────────────────────
+-- After the hc.app.* overrides above: the launcher binds read them.
+require("dots_binds")
+
+-- ── Host layer ───────────────────────────────────────────────────────────────
+-- Resolves via hyde.lua's package.path (~/.config/hypr/?.lua); each host
+-- overlay stows its own host.lua (wm/, lw/). check_require is HyDE's
+-- missing-tolerant require — a host without one just skips it.
+check_require("host")