remove duff lxc

distros/arch/lxc.md

@@ -1,112 +0,0 @@
----
-title: "lxc"
-tags: [ "Documentation", "distros" ]
----
-# Distro Specifics
-
-Arch dependencies: `arch-install-scripts` `dnsmasq`
-
-# Basic Setup
-
-Make and start a linux container called 'playtime':
-
-> # lxc-create -n playtime -t download
-
-> # lxc-ls --fancy
-
-> # lxc-start playtime
-
-Attach it:
-
-> # lxc-attach playtime
-
-# Networking
-
-Place the following in /etc/default/lxc-net to configure the network:
-
----
-
-         # Leave USE_LXC_BRIDGE as "true" if you want to use lx
-cbr0 for your
-         # containers.  Set to "false" if you'll use virbr0 or 
-another existing
-         # bridge, or mavlan to your host's NIC.
-         USE_LXC_BRIDGE="true"
-
-         # If you change the LXC_BRIDGE to something other than
- lxcbr0, then
-         # you will also need to update your /etc/lxc/default.c
-onf as well as the
-         # configuration (/var/lib/lxc/<container>/config) for 
-any containers
-         # already created using the default config to reflect 
-the new bridge
-         # name.
-         # If you have the dnsmasq daemon installed, you'll als
-o have to update
-         # /etc/dnsmasq.d/lxc and restart the system wide dnsma
-sq daemon.
-         LXC_BRIDGE="lxcbr0"
-         LXC_ADDR="10.0.3.1"
-         LXC_NETMASK="255.255.255.0"
-         LXC_NETWORK="10.0.3.0/24"
-         LXC_DHCP_RANGE="10.0.3.2,10.0.3.254"
-         LXC_DHCP_MAX="253"
-         # Uncomment the next line if you'd like to use a conf-
-file for the lxcbr0
-         # dnsmasq.  For instance, you can use 'dhcp-host=mail1
-,10.0.3.100' to have
-         # container 'mail1' always get ip address 10.0.3.100.
-         #LXC_DHCP_CONFILE=/etc/lxc/dnsmasq.conf
-
-         # Uncomment the next line if you want lxcbr0's dnsmasq
- to resolve the .lxc
-         # domain.  You can then add "server=/lxc/10.0.3.1' (or
- your actual $LXC_ADDR)
-         # to your system dnsmasq configuration file (normally 
-/etc/dnsmasq.conf,
-         # or /etc/NetworkManager/dnsmasq.d/lxc.conf on systems
- that use NetworkManager).
-         # Once these changes are made, restart the lxc-net and
- network-manager services.
-         # 'container1.lxc' will then resolve on your host.
-         #LXC_DOMAIN="lxc"
-
----
-
-Then start the lxc NAT:
-
-> sudo systemctl restart lxc-net
-
-> sudo systemctl restart NetworkManager
-
-... and make sure the bridge's ip-range doesn't intefere withe local network.
-
-> sudo arp-scan -I lxcbr0 -l
-
-The lxc template is in /etc/lxc/default.conf.  You need to modify it so that it uses lxcbr0.
-
----
-
-        /etc/lxc/default.conf
-         lxc.net.0.type = veth
-         lxc.net.0.link = lxcbr0
-         lxc.net.0.flags = up
-         lxc.net.0.hwaddr = 00:16:3e:xx:xx:xx
-
----
-
-# Making machines
-
-> sudo lxc-create -n roach -t download -- --dist archlinux --release current --arch amd64
-
-Arch linux containers take up about 600 Megs.
-
-To speed up the startup process, one can install haveged and start the haveged.service.  Haveged stops the wait-time for system entropy creation.
-
-Machines are stored in /var/lib/lxc.
-
-# Starting
-
-> lxc-attach -n roach
-