cantor/Cantor_Classic/libraries/Keebio-Parts.pretty/Triple-Dual-2u-LED-stab-flip.kicad_mod
Ryan Neff 91b40f613f
Cantor mx (#25)
* Swapped in Choc V2 switches, updated routing and outline
Removed redundant groundplane routing
Created double sided chocV2 footprint based on the kbd repo

* Updated readme.

* Added images

* Added images to Readme, fixed formatting

* Added gerbers

* Routing and edgecut cleanup, DRC error fixes

* Fixed drill layer misalingment and regenerated Gerbers

* Updated readme with pcb ordering instructions

* Added branding and rebuilt gerbers

* Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c

* Revised footprint for better Cherry MX 3-pin support
Added teardrops
Revised GND zone params to allow islands
Removed unneeded island creating vias
wiring tweaks

* Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile
Rebuilt teardrops
rebuilt ziones

* Fixed LH traces after footprint rework

* Updated readme

* Fixed MUR340 Hybrid footprint
Regenerated .dsn for autorouting

* Swapped in 'kitckitchen sink' switch footprints
Updated trrs jack
poke-yoke Blackpill masking

* Added jlcpcb order number silkscreen
updated version numbering

* Added speaker

* Moved piezo knockout below blackpill

* Modified Choc V2 3rd pin solder pads

* Moved ChocV2 3rd pin, made hotswop pads larger

* Updated choc v2 footprint to match kbd by foostan

* Updated branding, readme, and fixed drc breaks
THIS VERSION WAS SENT OUT FOR PRODUCTION

* Added upcharge notes from test run

* Added breakoff pinky cluster

* Updated breakoff pinky to not cut into hotswop pads

* Fixed broken keys with isolated ground planes
Moved footprints into repo
Connected some ground pins on switch footrpint
Updated docs with broken key notes

* Updated switch footrpints

* Footprint tweaks

* Added updated pic for v1.4

* Fixed choc 2nd min misalingment
Revised 'everything' footprint:
combined red-dragon and MX hole
removed organic masks in leiu of exotic annular rings
fixed malformed edge shapes

* Updated docs and fixed footprint mask

* Footprint cleanup
reverted branding to older MX specific style

* Fixed trrs footprint
added key numbering
cleaned up wiring between blackpill holes

* Removed speaker

* Sent this version out for production test (v1.5)

* Updated readme notes

* Added tentin puck

* Trace cleanup

* Updated trrs silks, bumped font size

* Consolidated cantor mx only footprints
Removed masterkey footprint library
Removed text from tenting puck footprint

* v1.5 tested successfuly

* Checkpoint commit

* Cleanup for PR

* Added gerber zip and Notes

* Updated honey-do

* Ignore cantore mx backup subdirectory

* Ignore Cantor MX backup subdirectory

* Exclude Cantor Classic KiCad backups from git

* Corner radius doubled next to TRRS jack

* Removed pinky snap-off ditch nubs

* Break-out point thickness increased
Thicker breakout points allowed for removal of GND traces on pinky column
Regenerated teardrops and planes

* Rounded corners using plugin
Fixed tiny-chunk traces that were preventing corner rounding
Regenerated tear drops
Regenerated zones
Updated versioning from 1.51 to 1.6

* Fixed malformed rounded corner trace
Regenerated Gerbers
Updated branding URL

* Udated trace connection for switch 11

* Revised branding/attribution

* Fixed rounded trace corner under MCU

* Regenerated Gerbers
Removed small ground zone island
Added vias to connect large GND zone islands
Fixed unrounded traces
Udated branding and attribution

* Pulled in changes from main, reverted readme

* Removed duplicate GND zone on front
Removed unused GND zone front/back vias
Fixed malformed trace on pin 4

* Moved front traces under MCU to back
Minor trace cleanup

* Dialed in teardrops
Moved most horizontal traces under MCU to back
Backside silk logo tweak
Updated drawing sheets attributions and versions
Regenerated Gerbers

* Fixed gerber mystery trace bug
Ran 'Cleanup track and vias' and it wiped out the mystery trace
Also reset origin points
regenrated Gerbers & zips

* Added note to BOM about tenting pucks
fixed readme spelling error
removed Cantor MX backups
2023-11-05 20:48:06 +01:00

121 lines
8.4 KiB
Plaintext

(module Triple-Dual-2u-LED-stab-flip (layer F.Cu) (tedit 5A1311B9)
(fp_text reference SW_2u-E6 (at 0 3.175) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.2)))
)
(fp_text value MX (at 0 5.08) (layer F.SilkS) hide
(effects (font (size 1.27 1.524) (thickness 0.2032)))
)
(fp_text user + (at -1.27 3.5) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user + (at -1.27 3.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user - (at 1.27 3.5) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user - (at 1.27 3.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user 2.00u (at -15.24 8.255) (layer Dwgs.User)
(effects (font (thickness 0.3048)))
)
(fp_line (start -6.35 -6.35) (end 6.35 -6.35) (layer Cmts.User) (width 0.1524))
(fp_line (start 6.35 -6.35) (end 6.35 6.35) (layer Cmts.User) (width 0.1524))
(fp_line (start 6.35 6.35) (end -6.35 6.35) (layer Cmts.User) (width 0.1524))
(fp_line (start -6.35 6.35) (end -6.35 -6.35) (layer Cmts.User) (width 0.1524))
(fp_line (start -18.923 -9.398) (end 18.923 -9.398) (layer Dwgs.User) (width 0.1524))
(fp_line (start 18.923 -9.398) (end 18.923 9.398) (layer Dwgs.User) (width 0.1524))
(fp_line (start 18.923 9.398) (end -18.923 9.398) (layer Dwgs.User) (width 0.1524))
(fp_line (start -18.923 9.398) (end -18.923 -9.398) (layer Dwgs.User) (width 0.1524))
(fp_line (start -6.985 -6.985) (end 6.985 -6.985) (layer Eco2.User) (width 0.1524))
(fp_line (start 6.985 -6.985) (end 6.985 -4.8768) (layer Eco2.User) (width 0.1524))
(fp_line (start 6.985 -4.8768) (end 8.6106 -4.8768) (layer Eco2.User) (width 0.1524))
(fp_line (start 8.6106 -4.8768) (end 8.6106 -5.6896) (layer Eco2.User) (width 0.1524))
(fp_line (start 8.6106 -5.6896) (end 15.2654 -5.6896) (layer Eco2.User) (width 0.1524))
(fp_line (start 15.2654 -5.6896) (end 15.2654 -2.286) (layer Eco2.User) (width 0.1524))
(fp_line (start 15.2654 -2.286) (end 16.129 -2.286) (layer Eco2.User) (width 0.1524))
(fp_line (start 16.129 -2.286) (end 16.129 0.508) (layer Eco2.User) (width 0.1524))
(fp_line (start 16.129 0.508) (end 15.2654 0.508) (layer Eco2.User) (width 0.1524))
(fp_line (start 15.2654 0.508) (end 15.2654 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start 15.2654 6.604) (end 14.224 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start 14.224 6.604) (end 14.224 7.7724) (layer Eco2.User) (width 0.1524))
(fp_line (start 14.224 7.7724) (end 9.652 7.7724) (layer Eco2.User) (width 0.1524))
(fp_line (start 9.652 7.7724) (end 9.652 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start 9.652 6.604) (end 8.6106 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start 8.6106 6.604) (end 8.6106 5.8166) (layer Eco2.User) (width 0.1524))
(fp_line (start 8.6106 5.8166) (end 6.985 5.8166) (layer Eco2.User) (width 0.1524))
(fp_line (start 6.985 5.8166) (end 6.985 6.985) (layer Eco2.User) (width 0.1524))
(fp_line (start 6.985 6.985) (end -6.985 6.985) (layer Eco2.User) (width 0.1524))
(fp_line (start -6.985 6.985) (end -6.985 5.8166) (layer Eco2.User) (width 0.1524))
(fp_line (start -6.985 5.8166) (end -8.6106 5.8166) (layer Eco2.User) (width 0.1524))
(fp_line (start -8.6106 5.8166) (end -8.6106 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start -8.6106 6.604) (end -9.652 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start -9.652 6.604) (end -9.652 7.7724) (layer Eco2.User) (width 0.1524))
(fp_line (start -9.652 7.7724) (end -14.224 7.7724) (layer Eco2.User) (width 0.1524))
(fp_line (start -14.224 7.7724) (end -14.224 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start -14.224 6.604) (end -15.2654 6.604) (layer Eco2.User) (width 0.1524))
(fp_line (start -15.2654 6.604) (end -15.2654 0.508) (layer Eco2.User) (width 0.1524))
(fp_line (start -15.2654 0.508) (end -16.129 0.508) (layer Eco2.User) (width 0.1524))
(fp_line (start -16.129 0.508) (end -16.129 -2.286) (layer Eco2.User) (width 0.1524))
(fp_line (start -16.129 -2.286) (end -15.2654 -2.286) (layer Eco2.User) (width 0.1524))
(fp_line (start -15.2654 -2.286) (end -15.2654 -5.6896) (layer Eco2.User) (width 0.1524))
(fp_line (start -15.2654 -5.6896) (end -8.6106 -5.6896) (layer Eco2.User) (width 0.1524))
(fp_line (start -8.6106 -5.6896) (end -8.6106 -4.8768) (layer Eco2.User) (width 0.1524))
(fp_line (start -8.6106 -4.8768) (end -6.985 -4.8768) (layer Eco2.User) (width 0.1524))
(fp_line (start -6.985 -4.8768) (end -6.985 -6.985) (layer Eco2.User) (width 0.1524))
(fp_line (start 15.367 -7.62) (end 8.509 -7.62) (layer Cmts.User) (width 0.1524))
(fp_line (start 8.509 -7.62) (end 8.509 7.62) (layer Cmts.User) (width 0.1524))
(fp_line (start 8.509 7.62) (end -8.509 7.62) (layer Cmts.User) (width 0.1524))
(fp_line (start -8.509 7.62) (end -8.509 -7.62) (layer Cmts.User) (width 0.1524))
(fp_line (start -8.509 -7.62) (end -15.367 -7.62) (layer Cmts.User) (width 0.1524))
(fp_line (start -15.367 -7.62) (end -15.367 10.16) (layer Cmts.User) (width 0.1524))
(fp_line (start -15.367 10.16) (end 15.367 10.16) (layer Cmts.User) (width 0.1524))
(fp_line (start 15.367 10.16) (end 15.367 -7.62) (layer Cmts.User) (width 0.1524))
(pad 1 thru_hole circle (at -3.81 -2.5 3.9) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 2 smd oval (at 2.52 -4.79 356.1) (size 2 2.581378) (layers F.Cu F.Paste F.Mask))
(pad 1 smd oval (at -3.155 -3.27 138.1) (size 2 3.961556) (layers F.Cu F.Paste F.Mask))
(pad HOLE np_thru_hole circle (at 0 0) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu))
(pad HOLE np_thru_hole circle (at -5.08 0) (size 1.8 1.8) (drill 1.8) (layers *.Cu))
(pad HOLE np_thru_hole circle (at 5.08 0) (size 1.8 1.8) (drill 1.8) (layers *.Cu))
(pad "" np_thru_hole circle (at -11.938 6.985) (size 3.048 3.048) (drill 3.048) (layers *.Cu))
(pad "" np_thru_hole circle (at 11.938 6.985) (size 3.048 3.048) (drill 3.048) (layers *.Cu))
(pad "" np_thru_hole circle (at -11.938 -8.255) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu))
(pad "" np_thru_hole circle (at 11.938 -8.255) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu))
(pad 2 thru_hole oval (at 3.81 -2.5 221.9) (size 1.5 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at -2.5 -4) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at -2.54 -5.08) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at -2.5 -4.5) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at 2.54 -5.08 3.9) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at 2.5 -4 3.9) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at 2.5 -4.5 3.9) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 1 smd oval (at -2.52 -4.79 3.9) (size 2 2.58) (layers B.Cu B.Paste B.Mask))
(pad 4 thru_hole rect (at 1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
(pad 3 thru_hole circle (at -1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
(pad 1 smd oval (at -3.155 -3.27 138.1) (size 2 3.961556) (layers B.Cu B.Paste B.Mask))
(pad 1 smd oval (at -2.52 -4.79 3.9) (size 2 2.58) (layers F.Cu F.Paste F.Mask))
(pad 2 smd oval (at 3.155 -3.27 221.9) (size 1.5 3.961556) (layers F.Cu F.Paste F.Mask))
(pad 2 smd oval (at 2.52 -4.79 356.1) (size 2 2.581378) (layers B.Cu B.Paste B.Mask))
(pad 2 smd oval (at 3.155 -3.27 221.9) (size 1.5 3.961556) (layers B.Cu B.Paste B.Mask))
(pad "" np_thru_hole circle (at -5.5 0) (size 1.7 1.7) (drill 1.7) (layers *.Cu))
(pad "" np_thru_hole circle (at 5.5 0) (size 1.7 1.7) (drill 1.7) (layers *.Cu))
(pad 2 thru_hole circle (at 0 -5.9) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at -5 -3.8) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
(pad 1 thru_hole oval (at 5 -3.8 221.9) (size 1.4 2) (drill 1.4) (layers *.Cu *.Mask))
(model /Users/danny/Documents/proj/custom-keyboard/kicad-libs/3d_models/mx-switch.wrl
(at (xyz 0.294 0.294 0.24))
(scale (xyz 0.4 0.4 0.4))
(rotate (xyz 270 0 180))
)
(model /Users/danny/Documents/proj/custom-keyboard/kicad-libs/3d_models/cherry-mx-stabilizer-2u-pcb.wrl
(at (xyz -0.47 0 0.14))
(scale (xyz 0.394 0.394 0.394))
(rotate (xyz 270 0 0))
)
(model /Users/danny/Documents/proj/custom-keyboard/kicad-libs/3d_models/SA-R3-2u.wrl
(at (xyz 0 0 0.47))
(scale (xyz 0.394 0.394 0.394))
(rotate (xyz 270 0 0))
)
)