Decentrala/cantor
13
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5bdae8c047
cantor/Cantor_Classic/libraries/keyswitches.pretty
History
Ryan Neff 91b40f613f
Cantor mx (#25) 
* Swapped in Choc V2 switches, updated routing and outline
Removed redundant groundplane routing
Created double sided chocV2 footprint based on the kbd repo

* Updated readme.

* Added images

* Added images to Readme, fixed formatting

* Added gerbers

* Routing and edgecut cleanup, DRC error fixes

* Fixed drill layer misalingment and regenerated Gerbers

* Updated readme with pcb ordering instructions

* Added branding and rebuilt gerbers

* Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c

* Revised footprint for better Cherry MX 3-pin support
Added teardrops
Revised GND zone params to allow islands
Removed unneeded island creating vias
wiring tweaks

* Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile
Rebuilt teardrops
rebuilt ziones

* Fixed LH traces after footprint rework

* Updated readme

* Fixed MUR340 Hybrid footprint
Regenerated .dsn for autorouting

* Swapped in 'kitckitchen sink' switch footprints
Updated trrs jack
poke-yoke Blackpill masking

* Added jlcpcb order number silkscreen
updated version numbering

* Added speaker

* Moved piezo knockout below blackpill

* Modified Choc V2 3rd pin solder pads

* Moved ChocV2 3rd pin, made hotswop pads larger

* Updated choc v2 footprint to match kbd by foostan

* Updated branding, readme, and fixed drc breaks
THIS VERSION WAS SENT OUT FOR PRODUCTION

* Added upcharge notes from test run

* Added breakoff pinky cluster

* Updated breakoff pinky to not cut into hotswop pads

* Fixed broken keys with isolated ground planes
Moved footprints into repo
Connected some ground pins on switch footrpint
Updated docs with broken key notes

* Updated switch footrpints

* Footprint tweaks

* Added updated pic for v1.4

* Fixed choc 2nd min misalingment
Revised 'everything' footprint:
combined red-dragon and MX hole
removed organic masks in leiu of exotic annular rings
fixed malformed edge shapes

* Updated docs and fixed footprint mask

* Footprint cleanup
reverted branding to older MX specific style

* Fixed trrs footprint
added key numbering
cleaned up wiring between blackpill holes

* Removed speaker

* Sent this version out for production test (v1.5)

* Updated readme notes

* Added tentin puck

* Trace cleanup

* Updated trrs silks, bumped font size

* Consolidated cantor mx only footprints
Removed masterkey footprint library
Removed text from tenting puck footprint

* v1.5 tested successfuly

* Checkpoint commit

* Cleanup for PR

* Added gerber zip and Notes

* Updated honey-do

* Ignore cantore mx backup subdirectory

* Ignore Cantor MX backup subdirectory

* Exclude Cantor Classic KiCad backups from git

* Corner radius doubled next to TRRS jack

* Removed pinky snap-off ditch nubs

* Break-out point thickness increased
Thicker breakout points allowed for removal of GND traces on pinky column
Regenerated teardrops and planes

* Rounded corners using plugin
Fixed tiny-chunk traces that were preventing corner rounding
Regenerated tear drops
Regenerated zones
Updated versioning from 1.51 to 1.6

* Fixed malformed rounded corner trace
Regenerated Gerbers
Updated branding URL

* Udated trace connection for switch 11

* Revised branding/attribution

* Fixed rounded trace corner under MCU

* Regenerated Gerbers
Removed small ground zone island
Added vias to connect large GND zone islands
Fixed unrounded traces
Udated branding and attribution

* Pulled in changes from main, reverted readme

* Removed duplicate GND zone on front
Removed unused GND zone front/back vias
Fixed malformed trace on pin 4

* Moved front traces under MCU to back
Minor trace cleanup

* Dialed in teardrops
Moved most horizontal traces under MCU to back
Backside silk logo tweak
Updated drawing sheets attributions and versions
Regenerated Gerbers

* Fixed gerber mystery trace bug
Ran 'Cleanup track and vias' and it wiped out the mystery trace
Also reset origin points
regenrated Gerbers & zips

* Added note to BOM about tenting pucks
fixed readme spelling error
removed Cantor MX backups
2023-11-05 20:48:06 +01:00
..
.github Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_optional_platemount.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_optional_reversible_platemount.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_optional_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_optional.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_platemount.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_reversible_platemount.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_MX.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_PG1350_optional_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_PG1350_optional.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_PG1350_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Kailh_socket_PG1350.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
LICENSE.md Cantor mx (#25) 2023-11-05 20:48:06 +01:00
README.md Cantor mx (#25) 2023-11-05 20:48:06 +01:00
Stabilizer_MX_2u.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_MX_reversible_minimal.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_MX_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_MX.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_PG1350_reversible_rotatable.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_PG1350_reversible.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00
SW_PG1350.kicad_mod Cantor mx (#25) 2023-11-05 20:48:06 +01:00

README.md

an open source KiCad library of mechanical keyboard switch footprints for your open source hardware keyboard designs

Switches

Cherry MX style and compatibles

Direct solder

Footprint Description/notes Preview
SW_MX One-sided mount for any MX-compatible switches. Supports PCB mount switches. MX Switch
SW_MX_reversible Enables any MX-compatible switches to be mounted on either side of the PCB, similar to the switch mounts on the original Ergodox PCBs. Supports PCB mount switches. SW_MX_reversible
SW_MX_reversible_minimal A variant of SW_MX_reversible with condensed reference marking and no PCB mount holes SW_MX_reversible_minimal

Hot-swap socket mount

Footprint Description/notes Preview
Kailh_socket_MX Hot-swappable socket mount for MX-compatible switches using Kailh MX sockets Kailh_socket_MX
Kailh_socket_MX_reversible Enables attaching hot-swappable MX-compatible socket mount on either side of the PCB. Note that the switch will be "upside-down" when mounted on the back side of the PCB, which may interfere with Cherry Profile keycaps. Kailh_socket_MX_reversible
Kailh_socket_MX_platemount Hot-swappable socket mount for MX-compatible plate mount (instead of 3 plastic pins, it only have 1 plastic pin on the center) switches using Kailh MX sockets It doesn't support PCB mounting option! Kailh_socket_MX
Kailh_socket_MX_reversible_platemount Enables attaching hot-swappable MX-compatible socket mount on either side of the PCB for plate mount (instead of 3 plastic pins, it only have 1 plastic pin on the center) switches. Note that the switch will be "upside-down" when mounted on the back side of the PCB, which may interfere with Cherry Profile keycaps. It doesn't support PCB mounting option! Kailh_socket_MX_reversible

Flexible mounting (choose socket or direct soldered when assembling)

Footprint Description/notes Preview
Kailh_socket_MX_optional Enables mounting MX-compatible switches using either through-hole soldering or the hot-swappable mount. Note that the switch will be "upside-down" when mounted in the socket, which may interfere with Cherry Profile keycaps. Kailh_socket_MX_optional
Kailh_socket_MX_optional_reversible Enables mounting MX-compatible switches using either through-hole soldering or the hot-swappable mount, on either side of the PCB. Note that the switch orientation will be reversed depending on which side of the PCB it is mounted on, which may affect aesthetics if the case leaves the switches visible, as well as possible interference with Cherry Profile keycaps. Kailh_socket_MX_optional_reversible
Kailh_socket_MX_optional Enables mounting MX-compatible plate mount (instead of 3 plastic pins, it only have 1 plastic pin on the center) switches using either through-hole soldering or the hot-swappable mount. Note that the switch will be "upside-down" when mounted in the socket, which may interfere with Cherry Profile keycaps. It doesn't support PCB mounting option! Kailh_socket_MX_optional_platemount
Kailh_socket_MX_optional_reversible Enables mounting MX-compatible plate mount (instead of 3 plastic pins, it only have 1 plastic pin on the center) switches using either through-hole soldering or the hot-swappable mount, on either side of the PCB. Note that the switch orientation will be reversed depending on which side of the PCB it is mounted on, which may affect aesthetics if the case leaves the switches visible, as well as possible interference with Cherry Profile keycaps. It doesn't support PCB mounting option! Kailh_socket_MX_optional_reversible_platemount

Kailh Low Profile "Choc"

Direct solder

Footprint Description/notes Preview
SW_PG1350 Just a plain one-sided mount for Kailh PG1350 switches PG1350 switch
SW_PG1350_reversible Enables the switch to be mounted on either side of the PCB, similar to the switch mounts on the original Ergodox PCBs PG1350 reversible
SW_PG1350_reversible_rotatable Enables the switch to be mounted on either side of the PCB and optionally rotated 90° by the person assembling the board. This option is intended to allow the board assembler to accomodate keycaps that only fit in a particular orientation. PG1350, reversible & rotatable

Hot-swap socket mount

Footprint Description/notes Preview
Kailh_socket_PG1350 Hot-swappable socket mount for Kailh Choc PCB Sockets PG1350 socket mount
Kailh_socket_PG1350_reversible Enables attaching hot-swappable socket mount on either side of the PCB PG1350 reversible socket mount

Flexible mounting (choose socket or direct soldered when assembling)

Footprint Description/notes Preview
Kailh_socket_PG1350_optional Enables switch to be attached with either through-hole soldering or hot-swappable mount PG1350 optional socket mount
Kailh_socket_PG1350_optional_reversible Enables switch to be attached on either side of the PCB with either through-hole soldering or hot-swappable mount PG1350 optional socket mount, reversible

Notes for switch footprints

The square in the layer F.Fab is meant to represent the outline of the switch as it would be mounted on the board. This is a change from older versions of this library but matches the KiCad library convention.

The plate footprint and LED mount area are marked on the layer Eco2.User. The plate footprint markings, especially for MX, are meant to show the overall dimensions of the cutout, not to be detailed enough to cut a plate from.

For all socket-mountable (and flexible-mount) footprints here, the socket is placed on the back of the footprint (i.e. the switch ends up mounted on the front if the footprint is placed on the front of the board). This goes against KiCad library standards for SMD parts but is done for consistency between the direct-mount and socket-mount footprints in this library. Be aware of this when placing the footprints on your board.

The fab layer and silkscreen for the socket footprints contain the standard information for both installing the switch on the front of the PCB and installing the socket on the back. Likewise, reversible footprints show the information for installation on both sides. Particularly with flexible-mount footprints, be careful that this doesn't cause confusion for anyone assembling your board – you may want to delete the extra silkscreen and fab info depending on your preferred assembly method or at least mention this in any assembly documentation you provide for your PCB.

Other included components

Footprint Description/notes Preview
Stabilizer_MX_2u Mounting holes for a 2u PCB-mount stabilizer for MX-style switches 2u MX-style stabilizer holes

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.