Decentrala/cantor
13
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5c392b1a66
cantor/doc/build_guide.md
Diego Palacios 0f66dc759b rev1.0
2022-02-27 01:02:50 +01:00

774 B
Raw Blame History

Build Guide

  1. Solder the pin headers to the blackpill microcontrollers. The microcontroller must be face down, as shown. blackpill with pin headers

  2. Solder the blackpill sockets and TRRS jacks on both PCBs, as shown. Sockets must be placed on top of the white PCB markings. Also, make sure you solder the components on different sides of the PCBs, so you end up with a right and left side and not two sides of the same hand.

    sockets and jack

  3. Place and solder the switches.

    switches

    1. Place the rubber feet on the bottom of the PCB.

      rubber feet

  4. Place the keycaps on top of the switches. Congrats! Your keyboard is built!