91b40f613f
* Swapped in Choc V2 switches, updated routing and outline Removed redundant groundplane routing Created double sided chocV2 footprint based on the kbd repo * Updated readme. * Added images * Added images to Readme, fixed formatting * Added gerbers * Routing and edgecut cleanup, DRC error fixes * Fixed drill layer misalingment and regenerated Gerbers * Updated readme with pcb ordering instructions * Added branding and rebuilt gerbers * Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c * Revised footprint for better Cherry MX 3-pin support Added teardrops Revised GND zone params to allow islands Removed unneeded island creating vias wiring tweaks * Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile Rebuilt teardrops rebuilt ziones * Fixed LH traces after footprint rework * Updated readme * Fixed MUR340 Hybrid footprint Regenerated .dsn for autorouting * Swapped in 'kitckitchen sink' switch footprints Updated trrs jack poke-yoke Blackpill masking * Added jlcpcb order number silkscreen updated version numbering * Added speaker * Moved piezo knockout below blackpill * Modified Choc V2 3rd pin solder pads * Moved ChocV2 3rd pin, made hotswop pads larger * Updated choc v2 footprint to match kbd by foostan * Updated branding, readme, and fixed drc breaks THIS VERSION WAS SENT OUT FOR PRODUCTION * Added upcharge notes from test run * Added breakoff pinky cluster * Updated breakoff pinky to not cut into hotswop pads * Fixed broken keys with isolated ground planes Moved footprints into repo Connected some ground pins on switch footrpint Updated docs with broken key notes * Updated switch footrpints * Footprint tweaks * Added updated pic for v1.4 * Fixed choc 2nd min misalingment Revised 'everything' footprint: combined red-dragon and MX hole removed organic masks in leiu of exotic annular rings fixed malformed edge shapes * Updated docs and fixed footprint mask * Footprint cleanup reverted branding to older MX specific style * Fixed trrs footprint added key numbering cleaned up wiring between blackpill holes * Removed speaker * Sent this version out for production test (v1.5) * Updated readme notes * Added tentin puck * Trace cleanup * Updated trrs silks, bumped font size * Consolidated cantor mx only footprints Removed masterkey footprint library Removed text from tenting puck footprint * v1.5 tested successfuly * Checkpoint commit * Cleanup for PR * Added gerber zip and Notes * Updated honey-do * Ignore cantore mx backup subdirectory * Ignore Cantor MX backup subdirectory * Exclude Cantor Classic KiCad backups from git * Corner radius doubled next to TRRS jack * Removed pinky snap-off ditch nubs * Break-out point thickness increased Thicker breakout points allowed for removal of GND traces on pinky column Regenerated teardrops and planes * Rounded corners using plugin Fixed tiny-chunk traces that were preventing corner rounding Regenerated tear drops Regenerated zones Updated versioning from 1.51 to 1.6 * Fixed malformed rounded corner trace Regenerated Gerbers Updated branding URL * Udated trace connection for switch 11 * Revised branding/attribution * Fixed rounded trace corner under MCU * Regenerated Gerbers Removed small ground zone island Added vias to connect large GND zone islands Fixed unrounded traces Udated branding and attribution * Pulled in changes from main, reverted readme * Removed duplicate GND zone on front Removed unused GND zone front/back vias Fixed malformed trace on pin 4 * Moved front traces under MCU to back Minor trace cleanup * Dialed in teardrops Moved most horizontal traces under MCU to back Backside silk logo tweak Updated drawing sheets attributions and versions Regenerated Gerbers * Fixed gerber mystery trace bug Ran 'Cleanup track and vias' and it wiped out the mystery trace Also reset origin points regenrated Gerbers & zips * Added note to BOM about tenting pucks fixed readme spelling error removed Cantor MX backups
108 lines
5.5 KiB
Plaintext
108 lines
5.5 KiB
Plaintext
(module ATMEGA32U4-AU (layer F.Cu) (tedit 0)
|
|
(solder_mask_margin 0.1)
|
|
(attr smd)
|
|
(fp_text reference ATMEGA32U4-AU (at -3.474 -8.014) (layer F.SilkS)
|
|
(effects (font (size 1.4 1.4) (thickness 0.05)))
|
|
)
|
|
(fp_text value MCU** (at -2.55 8.1261) (layer F.SilkS)
|
|
(effects (font (size 1.4 1.4) (thickness 0.05)))
|
|
)
|
|
(fp_line (start -4.8 -4.8) (end 4.8 -4.8) (layer F.SilkS) (width 0.2032))
|
|
(fp_line (start 4.8 -4.8) (end 4.8 4.8) (layer F.SilkS) (width 0.2032))
|
|
(fp_line (start 4.8 4.8) (end -4.8 4.8) (layer F.SilkS) (width 0.2032))
|
|
(fp_line (start -4.8 4.8) (end -4.8 -4.8) (layer F.SilkS) (width 0.2032))
|
|
(fp_circle (center -4 -4) (end -3.7173 -4) (layer F.SilkS) (width 0.254))
|
|
(fp_line (start -7 -7) (end 7 -7) (layer Dwgs.User) (width 0.05))
|
|
(fp_line (start 7 -7) (end 7 7) (layer Dwgs.User) (width 0.05))
|
|
(fp_line (start 7 7) (end -7 7) (layer Dwgs.User) (width 0.05))
|
|
(fp_line (start -7 7) (end -7 -7) (layer Dwgs.User) (width 0.05))
|
|
(pad 1 smd rect (at -5.9 -4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 2 smd rect (at -5.9 -3.2) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 3 smd rect (at -5.9 -2.4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 4 smd rect (at -5.9 -1.6) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 5 smd rect (at -5.9 -0.8) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 6 smd rect (at -5.9 0) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 7 smd rect (at -5.9 0.8) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 8 smd rect (at -5.9 1.6) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 9 smd rect (at -5.9 2.4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 10 smd rect (at -5.9 3.2) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 11 smd rect (at -5.9 4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 12 smd rect (at -4 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 13 smd rect (at -3.2 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 14 smd rect (at -2.4 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 15 smd rect (at -1.6 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 16 smd rect (at -0.8 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 17 smd rect (at 0 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 18 smd rect (at 0.8 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 19 smd rect (at 1.6 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 20 smd rect (at 2.4 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 21 smd rect (at 3.2 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 22 smd rect (at 4 5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 23 smd rect (at 5.9 4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 24 smd rect (at 5.9 3.2) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 25 smd rect (at 5.9 2.4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 26 smd rect (at 5.9 1.6) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 27 smd rect (at 5.9 0.8) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 28 smd rect (at 5.9 0) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 29 smd rect (at 5.9 -0.8) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 30 smd rect (at 5.9 -1.6) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 31 smd rect (at 5.9 -2.4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 32 smd rect (at 5.9 -3.2) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 33 smd rect (at 5.9 -4) (size 1.5 0.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 34 smd rect (at 4 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 35 smd rect (at 3.2 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 36 smd rect (at 2.4 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 37 smd rect (at 1.6 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 38 smd rect (at 0.8 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 39 smd rect (at 0 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 40 smd rect (at -0.8 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 41 smd rect (at -1.6 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 42 smd rect (at -2.4 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 43 smd rect (at -3.2 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
(pad 44 smd rect (at -4 -5.9) (size 0.5 1.5) (layers F.Cu F.Paste F.Mask)
|
|
(solder_mask_margin 0.2))
|
|
)
|