91b40f613f
* Swapped in Choc V2 switches, updated routing and outline Removed redundant groundplane routing Created double sided chocV2 footprint based on the kbd repo * Updated readme. * Added images * Added images to Readme, fixed formatting * Added gerbers * Routing and edgecut cleanup, DRC error fixes * Fixed drill layer misalingment and regenerated Gerbers * Updated readme with pcb ordering instructions * Added branding and rebuilt gerbers * Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c * Revised footprint for better Cherry MX 3-pin support Added teardrops Revised GND zone params to allow islands Removed unneeded island creating vias wiring tweaks * Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile Rebuilt teardrops rebuilt ziones * Fixed LH traces after footprint rework * Updated readme * Fixed MUR340 Hybrid footprint Regenerated .dsn for autorouting * Swapped in 'kitckitchen sink' switch footprints Updated trrs jack poke-yoke Blackpill masking * Added jlcpcb order number silkscreen updated version numbering * Added speaker * Moved piezo knockout below blackpill * Modified Choc V2 3rd pin solder pads * Moved ChocV2 3rd pin, made hotswop pads larger * Updated choc v2 footprint to match kbd by foostan * Updated branding, readme, and fixed drc breaks THIS VERSION WAS SENT OUT FOR PRODUCTION * Added upcharge notes from test run * Added breakoff pinky cluster * Updated breakoff pinky to not cut into hotswop pads * Fixed broken keys with isolated ground planes Moved footprints into repo Connected some ground pins on switch footrpint Updated docs with broken key notes * Updated switch footrpints * Footprint tweaks * Added updated pic for v1.4 * Fixed choc 2nd min misalingment Revised 'everything' footprint: combined red-dragon and MX hole removed organic masks in leiu of exotic annular rings fixed malformed edge shapes * Updated docs and fixed footprint mask * Footprint cleanup reverted branding to older MX specific style * Fixed trrs footprint added key numbering cleaned up wiring between blackpill holes * Removed speaker * Sent this version out for production test (v1.5) * Updated readme notes * Added tentin puck * Trace cleanup * Updated trrs silks, bumped font size * Consolidated cantor mx only footprints Removed masterkey footprint library Removed text from tenting puck footprint * v1.5 tested successfuly * Checkpoint commit * Cleanup for PR * Added gerber zip and Notes * Updated honey-do * Ignore cantore mx backup subdirectory * Ignore Cantor MX backup subdirectory * Exclude Cantor Classic KiCad backups from git * Corner radius doubled next to TRRS jack * Removed pinky snap-off ditch nubs * Break-out point thickness increased Thicker breakout points allowed for removal of GND traces on pinky column Regenerated teardrops and planes * Rounded corners using plugin Fixed tiny-chunk traces that were preventing corner rounding Regenerated tear drops Regenerated zones Updated versioning from 1.51 to 1.6 * Fixed malformed rounded corner trace Regenerated Gerbers Updated branding URL * Udated trace connection for switch 11 * Revised branding/attribution * Fixed rounded trace corner under MCU * Regenerated Gerbers Removed small ground zone island Added vias to connect large GND zone islands Fixed unrounded traces Udated branding and attribution * Pulled in changes from main, reverted readme * Removed duplicate GND zone on front Removed unused GND zone front/back vias Fixed malformed trace on pin 4 * Moved front traces under MCU to back Minor trace cleanup * Dialed in teardrops Moved most horizontal traces under MCU to back Backside silk logo tweak Updated drawing sheets attributions and versions Regenerated Gerbers * Fixed gerber mystery trace bug Ran 'Cleanup track and vias' and it wiped out the mystery trace Also reset origin points regenrated Gerbers & zips * Added note to BOM about tenting pucks fixed readme spelling error removed Cantor MX backups
47 lines
2.9 KiB
Plaintext
47 lines
2.9 KiB
Plaintext
(module MX-Alps-Choc-1U (layer F.Cu) (tedit 5CE00D88)
|
|
(fp_text reference REF** (at 0 3.175) (layer F.Fab)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text value 1U (at 0 -7.9375) (layer Dwgs.User)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_line (start 5 -7) (end 7 -7) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start 7 -7) (end 7 -5) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start 5 7) (end 7 7) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start 7 7) (end 7 5) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -7 5) (end -7 7) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -7 7) (end -5 7) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -5 -7) (end -7 -7) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -7 -7) (end -7 -5) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -9.525 -9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start 9.525 -9.525) (end 9.525 9.525) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start 9.525 9.525) (end -9.525 9.525) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -9.525 9.525) (end -9.525 -9.525) (layer Dwgs.User) (width 0.15))
|
|
(fp_text user + (at -1.27 3.5) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user + (at -1.27 3.5) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user - (at 1.27 3.5) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user - (at 1.27 3.5) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(pad 2 thru_hole oval (at 2.5 -4.5 86.1) (size 2.831378 2.25) (drill 1.47 (offset 0.290689 0)) (layers *.Cu *.Mask))
|
|
(pad 2 thru_hole circle (at 2.54 -5.08) (size 2.25 2.25) (drill 1.47) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole oval (at -3.81 -2.54 48.1) (size 4.211556 2.25) (drill 1.47 (offset 0.980778 0)) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at 0 0) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole circle (at -2.5 -4) (size 2.25 2.25) (drill 1.47) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at -5.08 0 48.0996) (size 1.75 1.75) (drill 1.75) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at 5.08 0 48.0996) (size 1.75 1.75) (drill 1.75) (layers *.Cu *.Mask))
|
|
(pad 2 thru_hole circle (at 5 -3.8) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole circle (at 0 -5.9) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at -5.5 0 48.1) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at 5.5 0 48.1) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at -5.22 4.2 48.1) (size 0.8 0.8) (drill 0.8) (layers *.Cu *.Mask))
|
|
(pad 3 thru_hole circle (at -1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
|
|
(pad 4 thru_hole rect (at 1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
|
|
)
|