91b40f613f
* Swapped in Choc V2 switches, updated routing and outline Removed redundant groundplane routing Created double sided chocV2 footprint based on the kbd repo * Updated readme. * Added images * Added images to Readme, fixed formatting * Added gerbers * Routing and edgecut cleanup, DRC error fixes * Fixed drill layer misalingment and regenerated Gerbers * Updated readme with pcb ordering instructions * Added branding and rebuilt gerbers * Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c * Revised footprint for better Cherry MX 3-pin support Added teardrops Revised GND zone params to allow islands Removed unneeded island creating vias wiring tweaks * Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile Rebuilt teardrops rebuilt ziones * Fixed LH traces after footprint rework * Updated readme * Fixed MUR340 Hybrid footprint Regenerated .dsn for autorouting * Swapped in 'kitckitchen sink' switch footprints Updated trrs jack poke-yoke Blackpill masking * Added jlcpcb order number silkscreen updated version numbering * Added speaker * Moved piezo knockout below blackpill * Modified Choc V2 3rd pin solder pads * Moved ChocV2 3rd pin, made hotswop pads larger * Updated choc v2 footprint to match kbd by foostan * Updated branding, readme, and fixed drc breaks THIS VERSION WAS SENT OUT FOR PRODUCTION * Added upcharge notes from test run * Added breakoff pinky cluster * Updated breakoff pinky to not cut into hotswop pads * Fixed broken keys with isolated ground planes Moved footprints into repo Connected some ground pins on switch footrpint Updated docs with broken key notes * Updated switch footrpints * Footprint tweaks * Added updated pic for v1.4 * Fixed choc 2nd min misalingment Revised 'everything' footprint: combined red-dragon and MX hole removed organic masks in leiu of exotic annular rings fixed malformed edge shapes * Updated docs and fixed footprint mask * Footprint cleanup reverted branding to older MX specific style * Fixed trrs footprint added key numbering cleaned up wiring between blackpill holes * Removed speaker * Sent this version out for production test (v1.5) * Updated readme notes * Added tentin puck * Trace cleanup * Updated trrs silks, bumped font size * Consolidated cantor mx only footprints Removed masterkey footprint library Removed text from tenting puck footprint * v1.5 tested successfuly * Checkpoint commit * Cleanup for PR * Added gerber zip and Notes * Updated honey-do * Ignore cantore mx backup subdirectory * Ignore Cantor MX backup subdirectory * Exclude Cantor Classic KiCad backups from git * Corner radius doubled next to TRRS jack * Removed pinky snap-off ditch nubs * Break-out point thickness increased Thicker breakout points allowed for removal of GND traces on pinky column Regenerated teardrops and planes * Rounded corners using plugin Fixed tiny-chunk traces that were preventing corner rounding Regenerated tear drops Regenerated zones Updated versioning from 1.51 to 1.6 * Fixed malformed rounded corner trace Regenerated Gerbers Updated branding URL * Udated trace connection for switch 11 * Revised branding/attribution * Fixed rounded trace corner under MCU * Regenerated Gerbers Removed small ground zone island Added vias to connect large GND zone islands Fixed unrounded traces Udated branding and attribution * Pulled in changes from main, reverted readme * Removed duplicate GND zone on front Removed unused GND zone front/back vias Fixed malformed trace on pin 4 * Moved front traces under MCU to back Minor trace cleanup * Dialed in teardrops Moved most horizontal traces under MCU to back Backside silk logo tweak Updated drawing sheets attributions and versions Regenerated Gerbers * Fixed gerber mystery trace bug Ran 'Cleanup track and vias' and it wiped out the mystery trace Also reset origin points regenrated Gerbers & zips * Added note to BOM about tenting pucks fixed readme spelling error removed Cantor MX backups
50 lines
2.9 KiB
Plaintext
50 lines
2.9 KiB
Plaintext
(module RotaryEncoder_EC11-no-legs (layer F.Cu) (tedit 5D4C8138)
|
|
(descr "Alps rotary encoder, EC12E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html")
|
|
(tags "rotary encoder")
|
|
(fp_text reference REF** (at -4.7 -7.2) (layer F.Fab)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text value RotaryEncoder_EC11-no-legs (at 0 7.9) (layer F.Fab)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user %R (at 3.6 3.8) (layer F.Fab)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_line (start -0.5 0) (end 0.5 0) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 0 -0.5) (end 0 0.5) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.1 3.5) (end 6.1 5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.1 -1.3) (end 6.1 1.3) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.1 -5.9) (end 6.1 -3.5) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -3 0) (end 3 0) (layer F.Fab) (width 0.12))
|
|
(fp_line (start 0 -3) (end 0 3) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -7.2 -4.1) (end -7.5 -3.8) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -7.8 -4.1) (end -7.2 -4.1) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -7.5 -3.8) (end -7.8 -4.1) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -6.1 -5.9) (end -6.1 5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -2 -5.9) (end -6.1 -5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -2 5.9) (end -6.1 5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.1 5.9) (end 2 5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 2 -5.9) (end 6.1 -5.9) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -6 -4.7) (end -5 -5.8) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -6 5.8) (end -6 -4.7) (layer F.Fab) (width 0.12))
|
|
(fp_line (start 6 5.8) (end -6 5.8) (layer F.Fab) (width 0.12))
|
|
(fp_line (start 6 -5.8) (end 6 5.8) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -5 -5.8) (end 6 -5.8) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -9 -7.1) (end 8.5 -7.1) (layer F.CrtYd) (width 0.05))
|
|
(fp_line (start -9 -7.1) (end -9 7.1) (layer F.CrtYd) (width 0.05))
|
|
(fp_line (start 8.5 7.1) (end 8.5 -7.1) (layer F.CrtYd) (width 0.05))
|
|
(fp_line (start 8.5 7.1) (end -9 7.1) (layer F.CrtYd) (width 0.05))
|
|
(fp_circle (center 0 0) (end 3 0) (layer F.SilkS) (width 0.12))
|
|
(fp_circle (center 0 0) (end 3 0) (layer F.Fab) (width 0.12))
|
|
(pad S1 thru_hole circle (at 7 2.5) (size 2 2) (drill 1) (layers *.Cu *.Mask))
|
|
(pad S2 thru_hole circle (at 7 -2.5) (size 2 2) (drill 1) (layers *.Cu *.Mask))
|
|
(pad B thru_hole circle (at -7.5 2.5) (size 2 2) (drill 1) (layers *.Cu *.Mask))
|
|
(pad C thru_hole circle (at -7.5 0) (size 2 2) (drill 1) (layers *.Cu *.Mask))
|
|
(pad A thru_hole rect (at -7.5 -2.5) (size 2 2) (drill 1) (layers *.Cu *.Mask))
|
|
(model ${KISYS3DMOD}/Rotary_Encoder.3dshapes/RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm.wrl
|
|
(at (xyz 0 0 0))
|
|
(scale (xyz 1 1 1))
|
|
(rotate (xyz 0 0 0))
|
|
)
|
|
)
|