91b40f613f
* Swapped in Choc V2 switches, updated routing and outline Removed redundant groundplane routing Created double sided chocV2 footprint based on the kbd repo * Updated readme. * Added images * Added images to Readme, fixed formatting * Added gerbers * Routing and edgecut cleanup, DRC error fixes * Fixed drill layer misalingment and regenerated Gerbers * Updated readme with pcb ordering instructions * Added branding and rebuilt gerbers * Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c * Revised footprint for better Cherry MX 3-pin support Added teardrops Revised GND zone params to allow islands Removed unneeded island creating vias wiring tweaks * Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile Rebuilt teardrops rebuilt ziones * Fixed LH traces after footprint rework * Updated readme * Fixed MUR340 Hybrid footprint Regenerated .dsn for autorouting * Swapped in 'kitckitchen sink' switch footprints Updated trrs jack poke-yoke Blackpill masking * Added jlcpcb order number silkscreen updated version numbering * Added speaker * Moved piezo knockout below blackpill * Modified Choc V2 3rd pin solder pads * Moved ChocV2 3rd pin, made hotswop pads larger * Updated choc v2 footprint to match kbd by foostan * Updated branding, readme, and fixed drc breaks THIS VERSION WAS SENT OUT FOR PRODUCTION * Added upcharge notes from test run * Added breakoff pinky cluster * Updated breakoff pinky to not cut into hotswop pads * Fixed broken keys with isolated ground planes Moved footprints into repo Connected some ground pins on switch footrpint Updated docs with broken key notes * Updated switch footrpints * Footprint tweaks * Added updated pic for v1.4 * Fixed choc 2nd min misalingment Revised 'everything' footprint: combined red-dragon and MX hole removed organic masks in leiu of exotic annular rings fixed malformed edge shapes * Updated docs and fixed footprint mask * Footprint cleanup reverted branding to older MX specific style * Fixed trrs footprint added key numbering cleaned up wiring between blackpill holes * Removed speaker * Sent this version out for production test (v1.5) * Updated readme notes * Added tentin puck * Trace cleanup * Updated trrs silks, bumped font size * Consolidated cantor mx only footprints Removed masterkey footprint library Removed text from tenting puck footprint * v1.5 tested successfuly * Checkpoint commit * Cleanup for PR * Added gerber zip and Notes * Updated honey-do * Ignore cantore mx backup subdirectory * Ignore Cantor MX backup subdirectory * Exclude Cantor Classic KiCad backups from git * Corner radius doubled next to TRRS jack * Removed pinky snap-off ditch nubs * Break-out point thickness increased Thicker breakout points allowed for removal of GND traces on pinky column Regenerated teardrops and planes * Rounded corners using plugin Fixed tiny-chunk traces that were preventing corner rounding Regenerated tear drops Regenerated zones Updated versioning from 1.51 to 1.6 * Fixed malformed rounded corner trace Regenerated Gerbers Updated branding URL * Udated trace connection for switch 11 * Revised branding/attribution * Fixed rounded trace corner under MCU * Regenerated Gerbers Removed small ground zone island Added vias to connect large GND zone islands Fixed unrounded traces Udated branding and attribution * Pulled in changes from main, reverted readme * Removed duplicate GND zone on front Removed unused GND zone front/back vias Fixed malformed trace on pin 4 * Moved front traces under MCU to back Minor trace cleanup * Dialed in teardrops Moved most horizontal traces under MCU to back Backside silk logo tweak Updated drawing sheets attributions and versions Regenerated Gerbers * Fixed gerber mystery trace bug Ran 'Cleanup track and vias' and it wiped out the mystery trace Also reset origin points regenrated Gerbers & zips * Added note to BOM about tenting pucks fixed readme spelling error removed Cantor MX backups
38 lines
2.3 KiB
Plaintext
38 lines
2.3 KiB
Plaintext
(module TRRS-PJ-320A-dual (layer F.Cu) (tedit 5970F8E5)
|
|
(fp_text reference REF** (at 0 14.2) (layer Dwgs.User)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text value TRRS-PJ-320A-dual (at 0 -5.6) (layer F.Fab)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user PJ-320A (at 4 5.25 270) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
|
|
)
|
|
(fp_text user PJ-320A (at -4 5.25 90) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_line (start 5.1 0) (end 5.1 -2) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start -0.5 -2) (end 5.1 -2) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start -0.5 0) (end -0.5 -2) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start -0.75 12.1) (end 5.35 12.1) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start 5.35 0) (end 5.35 12.1) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start -0.75 0) (end 5.35 0) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start -0.75 0) (end -0.75 12.1) (layer B.SilkS) (width 0.15))
|
|
(fp_line (start 0.5 -2) (end -5.1 -2) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start -5.1 0) (end -5.1 -2) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start 0.5 0) (end 0.5 -2) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start -5.35 0) (end -5.35 12.1) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start 0.75 0) (end 0.75 12.1) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start 0.75 12.1) (end -5.35 12.1) (layer F.SilkS) (width 0.15))
|
|
(fp_line (start 0.75 0) (end -5.35 0) (layer F.SilkS) (width 0.15))
|
|
(pad "" np_thru_hole circle (at 2.3 8.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at 2.3 1.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole oval (at 4.6 11.3) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole oval (at -4.6 11.3) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask))
|
|
(pad 2 thru_hole oval (at 0 10.2) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask))
|
|
(pad 4 thru_hole oval (at 0 3.2) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at -2.3 8.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at -2.3 1.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
|
|
(pad 3 thru_hole oval (at 0 6.2) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask))
|
|
)
|