91b40f613f
* Swapped in Choc V2 switches, updated routing and outline Removed redundant groundplane routing Created double sided chocV2 footprint based on the kbd repo * Updated readme. * Added images * Added images to Readme, fixed formatting * Added gerbers * Routing and edgecut cleanup, DRC error fixes * Fixed drill layer misalingment and regenerated Gerbers * Updated readme with pcb ordering instructions * Added branding and rebuilt gerbers * Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c * Revised footprint for better Cherry MX 3-pin support Added teardrops Revised GND zone params to allow islands Removed unneeded island creating vias wiring tweaks * Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile Rebuilt teardrops rebuilt ziones * Fixed LH traces after footprint rework * Updated readme * Fixed MUR340 Hybrid footprint Regenerated .dsn for autorouting * Swapped in 'kitckitchen sink' switch footprints Updated trrs jack poke-yoke Blackpill masking * Added jlcpcb order number silkscreen updated version numbering * Added speaker * Moved piezo knockout below blackpill * Modified Choc V2 3rd pin solder pads * Moved ChocV2 3rd pin, made hotswop pads larger * Updated choc v2 footprint to match kbd by foostan * Updated branding, readme, and fixed drc breaks THIS VERSION WAS SENT OUT FOR PRODUCTION * Added upcharge notes from test run * Added breakoff pinky cluster * Updated breakoff pinky to not cut into hotswop pads * Fixed broken keys with isolated ground planes Moved footprints into repo Connected some ground pins on switch footrpint Updated docs with broken key notes * Updated switch footrpints * Footprint tweaks * Added updated pic for v1.4 * Fixed choc 2nd min misalingment Revised 'everything' footprint: combined red-dragon and MX hole removed organic masks in leiu of exotic annular rings fixed malformed edge shapes * Updated docs and fixed footprint mask * Footprint cleanup reverted branding to older MX specific style * Fixed trrs footprint added key numbering cleaned up wiring between blackpill holes * Removed speaker * Sent this version out for production test (v1.5) * Updated readme notes * Added tentin puck * Trace cleanup * Updated trrs silks, bumped font size * Consolidated cantor mx only footprints Removed masterkey footprint library Removed text from tenting puck footprint * v1.5 tested successfuly * Checkpoint commit * Cleanup for PR * Added gerber zip and Notes * Updated honey-do * Ignore cantore mx backup subdirectory * Ignore Cantor MX backup subdirectory * Exclude Cantor Classic KiCad backups from git * Corner radius doubled next to TRRS jack * Removed pinky snap-off ditch nubs * Break-out point thickness increased Thicker breakout points allowed for removal of GND traces on pinky column Regenerated teardrops and planes * Rounded corners using plugin Fixed tiny-chunk traces that were preventing corner rounding Regenerated tear drops Regenerated zones Updated versioning from 1.51 to 1.6 * Fixed malformed rounded corner trace Regenerated Gerbers Updated branding URL * Udated trace connection for switch 11 * Revised branding/attribution * Fixed rounded trace corner under MCU * Regenerated Gerbers Removed small ground zone island Added vias to connect large GND zone islands Fixed unrounded traces Udated branding and attribution * Pulled in changes from main, reverted readme * Removed duplicate GND zone on front Removed unused GND zone front/back vias Fixed malformed trace on pin 4 * Moved front traces under MCU to back Minor trace cleanup * Dialed in teardrops Moved most horizontal traces under MCU to back Backside silk logo tweak Updated drawing sheets attributions and versions Regenerated Gerbers * Fixed gerber mystery trace bug Ran 'Cleanup track and vias' and it wiped out the mystery trace Also reset origin points regenrated Gerbers & zips * Added note to BOM about tenting pucks fixed readme spelling error removed Cantor MX backups
69 lines
4.3 KiB
Plaintext
69 lines
4.3 KiB
Plaintext
(module Triple-Dual-1u-LED (layer F.Cu) (tedit 5A12E290)
|
|
(fp_text reference CHERRY (at 0 3.175) (layer F.SilkS) hide
|
|
(effects (font (size 1.27 1.524) (thickness 0.2032)))
|
|
)
|
|
(fp_text value MX (at 0 5.08) (layer F.SilkS) hide
|
|
(effects (font (size 1.27 1.524) (thickness 0.2032)))
|
|
)
|
|
(fp_text user - (at 1.26 3.5) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
|
|
)
|
|
(fp_text user + (at -1.27 3.5) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
|
|
)
|
|
(fp_text user - (at 1.26 3.5) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user + (at -1.27 3.5) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_line (start -6.35 -6.35) (end 6.35 -6.35) (layer Cmts.User) (width 0.1524))
|
|
(fp_line (start 6.35 -6.35) (end 6.35 6.35) (layer Cmts.User) (width 0.1524))
|
|
(fp_line (start 6.35 6.35) (end -6.35 6.35) (layer Cmts.User) (width 0.1524))
|
|
(fp_line (start -6.35 6.35) (end -6.35 -6.35) (layer Cmts.User) (width 0.1524))
|
|
(fp_line (start -9.398 -9.398) (end 9.398 -9.398) (layer Dwgs.User) (width 0.1524))
|
|
(fp_line (start 9.398 -9.398) (end 9.398 9.398) (layer Dwgs.User) (width 0.1524))
|
|
(fp_line (start 9.398 9.398) (end -9.398 9.398) (layer Dwgs.User) (width 0.1524))
|
|
(fp_line (start -9.398 9.398) (end -9.398 -9.398) (layer Dwgs.User) (width 0.1524))
|
|
(fp_line (start -6.985 -6.985) (end 6.985 -6.985) (layer Eco2.User) (width 0.1524))
|
|
(fp_line (start 6.985 -6.985) (end 6.985 6.985) (layer Eco2.User) (width 0.1524))
|
|
(fp_line (start 6.985 6.985) (end -6.985 6.985) (layer Eco2.User) (width 0.1524))
|
|
(fp_line (start -6.985 6.985) (end -6.985 -6.985) (layer Eco2.User) (width 0.1524))
|
|
(pad 2 smd oval (at 2.52 -4.79 356.055) (size 2 2.581378) (layers F.Cu F.Paste F.Mask))
|
|
(pad 2 thru_hole circle (at 2.5 -4.5 330.95) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
|
|
(pad 2 thru_hole circle (at 2.54 -5.08 330.95) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole circle (at -2.5 -4 330.95) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
|
|
(pad HOLE np_thru_hole circle (at 0 0) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu))
|
|
(pad HOLE np_thru_hole circle (at -5.08 0) (size 1.8 1.8) (drill 1.8) (layers *.Cu))
|
|
(pad HOLE np_thru_hole circle (at 5.08 0) (size 1.8 1.8) (drill 1.8) (layers *.Cu))
|
|
(pad 1 thru_hole circle (at -3.81 -2.54) (size 2 2) (drill oval 1.2) (layers *.Cu *.Mask))
|
|
(pad 2 smd oval (at 3.155 -3.27 221.9) (size 1.5 3.961556) (layers B.Cu B.Paste B.Mask))
|
|
(pad 1 smd oval (at -3.155 -3.27 138.1) (size 2 3.961556) (layers B.Cu B.Paste B.Mask))
|
|
(pad 2 thru_hole circle (at 2.5 -4) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
|
|
(pad 2 thru_hole oval (at 3.81 -2.54 311.9) (size 2 1.5) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 1 smd oval (at -2.52 -4.79 3.945) (size 2 2.581378) (layers B.Cu B.Paste B.Mask))
|
|
(pad 1 thru_hole circle (at -2.5 -4.5 330.95) (size 2 2) (drill 1.4) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole circle (at -2.54 -5.08 330.95) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 4 thru_hole rect (at 1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
|
|
(pad 3 thru_hole circle (at -1.27 5.08) (size 1.905 1.905) (drill 0.9906) (layers *.Cu *.Mask))
|
|
(pad 1 smd oval (at -3.155 -3.27 138.1) (size 2 3.961556) (layers F.Cu F.Paste F.Mask))
|
|
(pad 1 smd oval (at -2.52 -4.79 3.945) (size 2 2.581378) (layers F.Cu F.Paste F.Mask))
|
|
(pad 2 smd oval (at 3.155 -3.27 221.9) (size 1.5 3.961556) (layers F.Cu F.Paste F.Mask))
|
|
(pad 2 smd oval (at 2.52 -4.79 356.055) (size 2 2.581378) (layers B.Cu B.Paste B.Mask))
|
|
(pad 2 thru_hole circle (at 0 -5.9) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole circle (at -5 -3.8 138.1) (size 2 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad 1 thru_hole oval (at 5 -3.8 221.9) (size 1.4 2) (drill 1.2) (layers *.Cu *.Mask))
|
|
(pad "" np_thru_hole circle (at 5.5 0) (size 1.7 1.7) (drill 1.7) (layers *.Cu))
|
|
(pad "" np_thru_hole circle (at -5.5 0) (size 1.7 1.7) (drill 1.7) (layers *.Cu))
|
|
(model /Users/danny/Documents/proj/custom-keyboard/kicad-libs/3d_models/mx-switch.wrl
|
|
(at (xyz 0.294 0.294 0.234))
|
|
(scale (xyz 0.4 0.4 0.4))
|
|
(rotate (xyz 270 0 180))
|
|
)
|
|
(model /Users/danny/Documents/proj/custom-keyboard/kicad-libs/3d_models/SA-R3-1u.wrl
|
|
(at (xyz 0 0 0.47))
|
|
(scale (xyz 0.394 0.394 0.394))
|
|
(rotate (xyz 270 0 0))
|
|
)
|
|
)
|